User Manuel

1. Storage

To avoid moisture, we recommend storage conditions for the unopened LED +5 ~ +30℃
rela-tive humidity <60%. LED should be used within 168 Hrs. of opening the package. Please
make sure to dehumidify and vacuum pack the remaining/ unused LED. Dehumidifying condition:
+120℃±5℃ of 4Hrs. The Effective age for the sealed led is one year.

2. Anti-static measures

Please take adequate measures to prevent electrostatic generation, such as wearing
electrostatic ring or anti-static fingerstall etc; any relative products like plant
equipment, machinery, carrier, and transportation units shall be connected to the discharge
unit/ ground. The ESD sensitivity of this product is > 1000V(HBM), after assembly the final
lamp, please make sure to discharge Static Electricity with proper ESD equipment.

3. Temperature control

Recommended temperature conditions for enhanced product life: Be sure to TS point (negative
pads) controlled below 85℃, COB recommendation colloid surface temperature control ≤150℃.

4. Others

Should the product be used outdoors, be sure to IP (protection class) ≥65

Product is not suitable to use in the following conditions

-Direct or indirect wet/damp conditions, such as rain, etc.;

-In contact with sea water and erosive materials

-Exposed to corrosive gases (e.g., Cl2, H2S, NH3, SOx, NOx, etc.);

-Exposed to dust, liquids, or oils.